Inflatables

Plush Inflatables for Events: How to Choose a Character for a Retail Photo Display

When choosing plush inflatables for events, start with where people will take the photo. A character needs room for its full operating setup, the people posing beside it and the person holding the camera. At a mall or store entrance, all three spaces can compete with ordinary foot traffic. Shortlist a character by its listed height and appearance, then ask for the model dimensions and installation details before committing to a location.

Shortlist a character by height and viewing distance

The Ginflatables plush inflatables collection lists a 2 m inflatable plush panda and a 3 m inflatable plush bear. For a campaign that can use either animal, put both on the shortlist if the venue has room to consider them. Decide what the character needs to do. A display that guests discover after entering a shop can be sized around the photo itself. A display that also has to be visible from a mall approach needs a sightline check from that approach.

Catalogue modelListed heightWhat to check before choosing
Inflatable Plush Panda, GPL-0012 mConfirm inflated width and depth, then check whether a group and the whole character fit in the intended camera view.
Inflatable Plush Bear, GPL-0023 mConfirm overhead clearance at the display point and check how far back a photographer would need to stand to frame the figure.

Once you have the inflated dimensions, ask for packed dimensions and handling details as well. The packed unit has to reach the setup area through the route that will actually be available during load-in. If the brief instead requires a recognizable brand character, use the guide to custom inflatable characters to prepare the artwork and confirm which finishes the supplier can offer.

Map the retail photo display before ordering

Mark four positions on the floor plan: the character and its full operating footprint, the people in the photo, the photographer, and any waiting guests. Draw the normal walking route through the area as a separate line. Ask the venue team to check the plan against the access and circulation space it requires. Include cables and securing equipment in the proposed layout once the supplier confirms how the model is installed.

Example 1: A store photo spot near the entrance

Start by plotting the 2 m panda inside the store. Mark where a family would stand and where someone taking a phone photo would naturally step back. If that position falls into the entrance or checkout route, rotate the proposed display or move the photo point deeper into the store. Once you have the confirmed width, depth and operating footprint, use floor tape to test the revised position. Frame a photo from the proposed spot and check where waiting guests would collect during a busy period.

Example 2: A mall atrium display

Plot the 3 m bear against a sightline that the event team wants to use, such as the approach from a main corridor. Check vertical clearance at the proposed setup point, including any overhead signs or temporary structures. Identify a place for waiting groups beside the display so the photographer can stay outside the main pedestrian route. Then trace load-in from the delivery point to the atrium. Check the service entrance, any lift and tight turns against the confirmed packed dimensions. Walk the route with venue staff if there is any uncertainty over which doors will be open.

If the event brief also calls for a performer to greet guests or move around the venue, use the inflatable mascot costume buying guide to specify the wearable equipment separately.

Send the supplier a quote request they can check against the venue

Give the venue a named contact who can approve layout changes on setup day. If the proposed spot changes, repeat the camera and circulation checks at the new location before opening the display to guests.

Give each supplier the same layout, model reference and event date. Ask for the setup information in writing so the installation crew and venue can review the same proposal. If the character is one of several advertising inflatables on the site, include the other items on the plan so everyone can see where the setups and visitor routes meet.

  • Model or shortlist, event dates, delivery address and load-in window.
  • Marked floor plan with overhead limits, the available load-in route and the proposed photo and waiting positions.
  • Confirmed inflated width and depth, full operating footprint, packed dimensions, and handling requirements.
  • Model-specific power needs, cable routing, securing method and conditions for indoor or outdoor use.
  • Close-up photos of the finish, instructions for cleaning and drying after the event, and confirmation of availability for the required dates.

Ask the venue to review the supplier’s confirmed layout before placing the order. If both characters fit, choose the one that works from the intended camera position and leaves room for the expected waiting groups. If the larger figure forces the photo or queue into the main route, revise the layout or choose the smaller model.

Planning to buy inflatables for your rental business or event?
Get a Free Quote WhatsApp